AEROLINE® INOX RAPID PRO GS
PIPING SYSTEM FOR CONNECTING AIR/WATER HEAT PUMPS INSTALLED CLOSE TO THE WALL OUTSIDE AND FOR DISTRIBUTING BRINE OR WATER INDOORS
-
AEROLINE® INOX TERRA
-
AEROLINE® INOX PRO GS
-
AEROLINE® INOX RAPID CLASSIC
-
AEROLINE® INOX RAPID PRO GS
-
AEROLINE® INOX CONNECT 200
-
AEROLINE® INOX RAPID BASIC
-
AEROLINE® PEX TERRA
-
AEROLINE® PEX PRO GS
AEROLINE® INOX RAPID PRO GS
- Corrosion-resistant and flexible carrier pipes made of high-quality stainless steel.
- Optimal thermal insulation thanks to closed-cell EPDM foam.
- Additional surface protection made of polyester braid.
CONSISTING OF:
SHEATHING
- Material: Polyester braid
- UV resistance: Excellent
- Ozone resistance: Excellent
STAINLESS STEEL CORRUGATED PIPE
- Material: Material No. 1. 4404 (AISI 316L)
- Maximum permissible operating pressure at 95 °C:
- DN 25: 12 bar
- DN 32: 6,5 bar
- DN 40: 5,8 bar
- Minimum bending radius: 60 mm (DN 25) or 55 mm (DN32 / DN40)
INSULATION MADE OF EPDM
- Material:
- Light, flexible, closed-cell, synthetic rubber
- No embrittlement of copper and stainless steel pipes (DIN 1988 Part 200)
- Dimensions and tolerances according to DIN EN 14304
- Thermal conductivity:
- 0,036 W/mK at 0 °C
- 0,038 W/mK at 40 °C
- Fire behaviour: Euro class E (DIN EN 13501-1)
- Temperature range: +150°C (short-term up to +175°C) (EN 14707)
DELIVERY PROGRAMME
- DN 25: available in the following lengths: 5m – 10m – 25m
- DN 32: available in the following lengths: 5m – 10m – 25m
- DN 40: available in the following lengths: 5m – 10m – 25m
Applikationer
-
Värme och sanitet
-
Värmepumpar
-
Ventilation
-
Luftkonditionering
-
Kylsystem
-
Solkraftsmodul
-
Höga temperaturer
-
Industrin
-
Integrerade OEM-lösningar
-
Halogenfri
-
Hobbysnickare
-
AEROLINE® INOX RAPID PRO GS
-
PRE-INSULATED CABLE SYSTEMS FOR PULLING INTO ALREADY LAID UNDERGROUND PIPES
Tillbehör
-
MOUNTAIN CLAMPS